# Regression (OLS) - overview

This page offers structured overviews of one or more selected methods. Add additional methods for comparisons by clicking on the dropdown button in the right-hand column. To practice with a specific method click the button at the bottom row of the table

Regression (OLS)
One way ANOVA
Two sample $t$ test - equal variances assumed
Independent variablesIndependent variableIndependent variable
One or more quantitative of interval or ratio level and/or one or more categorical with independent groups, transformed into code variablesOne categorical with $I$ independent groups ($I \geqslant 2$)One categorical with 2 independent groups
Dependent variableDependent variableDependent variable
One quantitative of interval or ratio levelOne quantitative of interval or ratio levelOne quantitative of interval or ratio level
Null hypothesisNull hypothesisNull hypothesis
$F$ test for the complete regression model:
• $\beta_1 = \beta_2 = \ldots = \beta_K = 0$
or equivalenty
• The variance explained by all the independent variables together (the complete model) is 0 in the population: $\rho^2 = 0$
$t$ test for individual regression coefficient $\beta_k$:
• $\beta_k = 0$
in the regression equation $\mu_y = \beta_0 + \beta_1 \times x_1 + \beta_2 \times x_2 + \ldots + \beta_K \times x_K$
ANOVA $F$ test:
• $\mu_1 = \mu_2 = \ldots = \mu_I$
$\mu_1$ is the unknown mean in population 1; $\mu_2$ is the unknown mean in population 2; $\mu_I$ is the unknown mean in population $I$
$t$ Test for contrast:
• $\Psi = 0$
$\Psi$ is a contrast in the population, defined as $\Psi = \sum a_i\mu_i$. Here $\mu_i$ is the unknown mean in population $i$ and $a_i$ is the coefficient for $\mu_i$. The coefficients $a_i$ sum to 0.
$t$ Test multiple comparisons:
• $\mu_g = \mu_h$
$\mu_g$ is the unknown mean in population $g$; $\mu_h$ is the unknown mean in population $h$
$\mu_1 = \mu_2$
$\mu_1$ is the unknown mean in population 1, $\mu_2$ is the unknown mean in population 2
Alternative hypothesisAlternative hypothesisAlternative hypothesis
$F$ test for the complete regression model:
• not all population regression coefficients are 0
or equivalenty
• The variance explained by all the independent variables together (the complete model) is larger than 0 in the population: $\rho^2 > 0$
$t$ test for individual $\beta_k$:
• Two sided: $\beta_k \neq 0$
• Right sided: $\beta_k > 0$
• Left sided: $\beta_k < 0$
ANOVA $F$ test:
• Not all population means are equal
$t$ Test for contrast:
• Two sided: $\Psi \neq 0$
• Right sided: $\Psi > 0$
• Left sided: $\Psi < 0$
$t$ Test multiple comparisons:
• Usually two sided: $\mu_g \neq \mu_h$
Two sided: $\mu_1 \neq \mu_2$
Right sided: $\mu_1 > \mu_2$
Left sided: $\mu_1 < \mu_2$
AssumptionsAssumptionsAssumptions
• In the population, the residuals are normally distributed at each combination of values of the independent variables
• In the population, the standard deviation $\sigma$ of the residuals is the same for each combination of values of the independent variables (homoscedasticity)
• In the population, the relationship between the independent variables and the mean of the dependent variable $\mu_y$ is linear. If this linearity assumption holds, the mean of the residuals is 0 for each combination of values of the independent variables
• The residuals are independent of one another
• Variables are measured without error
Also pay attention to:
• Multicollinearity
• Outliers
• Within each population, the scores on the dependent variable are normally distributed
• The standard deviation of the scores on the dependent variable is the same in each of the populations: $\sigma_1 = \sigma_2 = \ldots = \sigma_I$
• Group 1 sample is a simple random sample (SRS) from population 1, group 2 sample is an independent SRS from population 2, $\ldots$, group $I$ sample is an independent SRS from population $I$. That is, within and between groups, observations are independent of one another
• Within each population, the scores on the dependent variable are normally distributed
• The standard deviation of the scores on the dependent variable is the same in both populations: $\sigma_1 = \sigma_2$
• Group 1 sample is a simple random sample (SRS) from population 1, group 2 sample is an independent SRS from population 2. That is, within and between groups, observations are independent of one another
Test statisticTest statisticTest statistic
$F$ test for the complete regression model:
• \begin{aligned}[t] F &= \dfrac{\sum (\hat{y}_j - \bar{y})^2 / K}{\sum (y_j - \hat{y}_j)^2 / (N - K - 1)}\\ &= \dfrac{\mbox{sum of squares model} / \mbox{degrees of freedom model}}{\mbox{sum of squares error} / \mbox{degrees of freedom error}}\\ &= \dfrac{\mbox{mean square model}}{\mbox{mean square error}} \end{aligned}
where $\hat{y}_j$ is the predicted score on the dependent variable $y$ of subject $j$, $\bar{y}$ is the mean of $y$, $y_j$ is the score on $y$ of subject $j$, $N$ is the total sample size, and $K$ is the number of independent variables
$t$ test for individual $\beta_k$:
• $t = \dfrac{b_k}{SE_{b_k}}$
• If only one independent variable:
$SE_{b_1} = \dfrac{\sqrt{\sum (y_j - \hat{y}_j)^2 / (N - 2)}}{\sqrt{\sum (x_j - \bar{x})^2}} = \dfrac{s}{\sqrt{\sum (x_j - \bar{x})^2}}$, with $s$ the sample standard deviation of the residuals, $x_j$ the score of subject $j$ on the independent variable $x$, and $\bar{x}$ the mean of $x$. For models with more than one independent variable, computing $SE_{b_k}$ becomes complicated
Note 1: mean square model is also known as mean square regression; mean square error is also known as mean square residual
Note 2: if only one independent variable ($K = 1$), the $F$ test for the complete regression model is equivalent to the two sided $t$ test for $\beta_1$
ANOVA $F$ test:
• \begin{aligned}[t] F &= \dfrac{\sum\nolimits_{subjects} (\mbox{subject's group mean} - \mbox{overall mean})^2 / (I - 1)}{\sum\nolimits_{subjects} (\mbox{subject's score} - \mbox{its group mean})^2 / (N - I)}\\ &= \dfrac{\mbox{sum of squares between} / \mbox{degrees of freedom between}}{\mbox{sum of squares error} / \mbox{degrees of freedom error}}\\ &= \dfrac{\mbox{mean square between}}{\mbox{mean square error}} \end{aligned}
where $N$ is the total sample size, and $I$ is the number of groups.
Note: mean square between is also known as mean square model; mean square error is also known as mean square residual or mean square within
$t$ Test for contrast:
• $t = \dfrac{c}{s_p\sqrt{\sum \dfrac{a^2_i}{n_i}}}$
Here $c$ is the sample estimate of the population contrast $\Psi$: $c = \sum a_i\bar{y}_i$, with $\bar{y}_i$ the sample mean in group $i$. $s_p$ is the pooled standard deviation based on all the $I$ groups in the ANOVA, $a_i$ is the contrast coefficient for group $i$, and $n_i$ is the sample size of group $i$.
Note that if the contrast compares only two group means with each other, this $t$ statistic is very similar to the two sample $t$ statistic (assuming equal population standard deviations). In that case the only difference is that we now base the pooled standard deviation on all the $I$ groups, which affects the $t$ value if $I \geqslant 3$. It also affects the corresponding degrees of freedom.
$t$ Test multiple comparisons:
• $t = \dfrac{\bar{y}_g - \bar{y}_h}{s_p\sqrt{\dfrac{1}{n_g} + \dfrac{1}{n_h}}}$
$\bar{y}_g$ is the sample mean in group $g$, $\bar{y}_h$ is the sample mean in group $h$, $s_p$ is the pooled standard deviation based on all the $I$ groups in the ANOVA, $n_g$ is the sample size of group $g$, and $n_h$ is the sample size of group $h$.
Note that this $t$ statistic is very similar to the two sample $t$ statistic (assuming equal population standard deviations). The only difference is that we now base the pooled standard deviation on all the $I$ groups, which affects the $t$ value if $I \geqslant 3$. It also affects the corresponding degrees of freedom.
$t = \dfrac{(\bar{y}_1 - \bar{y}_2) - 0}{s_p\sqrt{\dfrac{1}{n_1} + \dfrac{1}{n_2}}} = \dfrac{\bar{y}_1 - \bar{y}_2}{s_p\sqrt{\dfrac{1}{n_1} + \dfrac{1}{n_2}}}$
$\bar{y}_1$ is the sample mean in group 1, $\bar{y}_2$ is the sample mean in group 2, $s_p$ is the pooled standard deviation, $n_1$ is the sample size of group 1, $n_2$ is the sample size of group 2. The 0 represents the difference in population means according to H0.

The denominator $s_p\sqrt{\dfrac{1}{n_1} + \dfrac{1}{n_2}}$ is the standard error of the sampling distribution of $\bar{y}_1 - \bar{y}_2$. The $t$ value indicates how many standard errors $\bar{y}_1 - \bar{y}_2$ is removed from 0.

Note: we could just as well compute $\bar{y}_2 - \bar{y}_1$ in the numerator, but then the left sided alternative becomes $\mu_2 < \mu_1$, and the right sided alternative becomes $\mu_2 > \mu_1$
Sample standard deviation of the residuals $s$Pooled standard deviationPooled standard deviation
\begin{aligned} s &= \sqrt{\dfrac{\sum (y_j - \hat{y}_j)^2}{N - K - 1}}\\ &= \sqrt{\dfrac{\mbox{sum of squares error}}{\mbox{degrees of freedom error}}}\\ &= \sqrt{\mbox{mean square error}} \end{aligned} \begin{aligned} s_p &= \sqrt{\dfrac{(n_1 - 1) \times s^2_1 + (n_2 - 1) \times s^2_2 + \ldots + (n_I - 1) \times s^2_I}{N - I}}\\ &= \sqrt{\dfrac{\sum\nolimits_{subjects} (\mbox{subject's score} - \mbox{its group mean})^2}{N - I}}\\ &= \sqrt{\dfrac{\mbox{sum of squares error}}{\mbox{degrees of freedom error}}}\\ &= \sqrt{\mbox{mean square error}} \end{aligned} where s^2_i is the variance in group i s_p = \sqrt{\dfrac{(n_1 - 1) \times s^2_1 + (n_2 - 1) \times s^2_2}{n_1 + n_2 - 2}} Sampling distribution of F and of t if H0 were trueSampling distribution of F and of t if H0 were trueSampling distribution of t if H0 were true Sampling distribution of F: • F distribution with K (df model, numerator) and N - K - 1 (df error, denominator) degrees of freedom Sampling distribution of t: • t distribution with N - K - 1 (df error) degrees of freedom Sampling distribution of F: • F distribution with I - 1 (df between, numerator) and N - I (df error, denominator) degrees of freedom Sampling distribution of t: • t distribution with N - I degrees of freedom t distribution with n_1 + n_2 - 2 degrees of freedom Significant?Significant?Significant? F test: • Check if F observed in sample is equal to or larger than critical value F^* or • Find p value corresponding to observed F and check if it is equal to or smaller than \alpha t Test two sided: t Test right sided: t Test left sided: F test: • Check if F observed in sample is equal to or larger than critical value F^* or • Find p value corresponding to observed F and check if it is equal to or smaller than \alpha (e.g. .01 < p < .025 when F = 3.91, df between = 4, and df error = 20) t Test for contrast two sided: t Test for contrast right sided: t Test for contrast left sided: t Test multiple comparisons two sided: • Check if t observed in sample is at least as extreme as critical value t^{**}. Adapt t^{**} according to a multiple comparison procedure (e.g., Bonferroni) or • Find two sided p value corresponding to observed t and check if it is equal to or smaller than \alpha. Adapt the p value or \alpha according to a multiple comparison procedure t Test multiple comparisons right sided • Check if t observed in sample is equal to or larger than critical value t^{**}. Adapt t^{**} according to a multiple comparison procedure (e.g., Bonferroni) or • Find right sided p value corresponding to observed t and check if it is equal to or smaller than \alpha. Adapt the p value or \alpha according to a multiple comparison procedure t Test multiple comparisons left sided • Check if t observed in sample is equal to or smaller than critical value t^{**}. Adapt t^{**} according to a multiple comparison procedure (e.g., Bonferroni) or • Find left sided p value corresponding to observed t and check if it is equal to or smaller than \alpha. Adapt the p value or \alpha according to a multiple comparison procedure Two sided: Right sided: Left sided: C\% confidence interval for \beta_k and for \mu_y; C\% prediction interval for y_{new}C\% confidence interval for $\Psi$, for $\mu_g - \mu_h$, and for \mu_i$$C\% confidence interval for \mu_1 - \mu_2 Confidence interval for \beta_k: • b_k \pm t^* \times SE_{b_k} • If only one independent variable: SE_{b_1} = \dfrac{\sqrt{\sum (y_j - \hat{y}_j)^2 / (N - 2)}}{\sqrt{\sum (x_j - \bar{x})^2}} = \dfrac{s}{\sqrt{\sum (x_j - \bar{x})^2}} Confidence interval for \mu_y, the population mean of y given the values on the independent variables: • \hat{y} \pm t^* \times SE_{\hat{y}} • If only one independent variable: SE_{\hat{y}} = s \sqrt{\dfrac{1}{N} + \dfrac{(x^* - \bar{x})^2}{\sum (x_j - \bar{x})^2}} Prediction interval for y_{new}, the score on y of a future respondent: • \hat{y} \pm t^* \times SE_{y_{new}} • If only one independent variable: SE_{y_{new}} = s \sqrt{1 + \dfrac{1}{N} + \dfrac{(x^* - \bar{x})^2}{\sum (x_j - \bar{x})^2}} In all formulas, the critical value t^* is the value under the t_{N - K - 1} distribution with the area C / 100 between -t^* and t^* (e.g. t^* = 2.086 for a 95% confidence interval when df = 20). Confidence interval for \Psi (contrast): • c \pm t^* \times s_p\sqrt{\sum \dfrac{a^2_i}{n_i}} where the critical value t^* is the value under the t_{N - I} distribution with the area C / 100 between -t^* and t^* (e.g. t^* = 2.086 for a 95% confidence interval when df = 20). Note that n_i is the sample size of group i, and N is the total sample size, based on all the I groups. Confidence interval for \mu_g - \mu_h (multiple comparisons): • (\bar{y}_g - \bar{y}_h) \pm t^{**} \times s_p\sqrt{\dfrac{1}{n_g} + \dfrac{1}{n_h}} where t^{**} depends upon C, degrees of freedom (N - I), and the multiple comparison procedure. If you do not want to apply a multiple comparison procedure, t^{**} = t^* = the value under the t_{N - I} distribution with the area C / 100 between -t^* and t^*. Note that n_g is the sample size of group g, n_h is the sample size of group h, and N is the total sample size, based on all the I groups. Confidence interval for single population mean \mu_i: • \bar{y}_i \pm t^* \times \dfrac{s_p}{\sqrt{n_i}} where \bar{y}_i is the sample mean for group i, n_i is the sample size for group i, and the critical value t^* is the value under the t_{N - I} distribution with the area C / 100 between -t^* and t^* (e.g. t^* = 2.086 for a 95% confidence interval when df = 20). Note that n_i is the sample size of group i, and N is the total sample size, based on all the I groups. (\bar{y}_1 - \bar{y}_2) \pm t^* \times s_p\sqrt{\dfrac{1}{n_1} + \dfrac{1}{n_2}} where the critical value t^* is the value under the t_{n_1 + n_2 - 2} distribution with the area C / 100 between -t^* and t^* (e.g. t^* = 2.086 for a 95% confidence interval when df = 20) The confidence interval for \mu_1 - \mu_2 can also be used as significance test. Effect sizeEffect sizeEffect size Complete model: • Proportion variance explained R^2: Proportion variance of the dependent variable y explained by the sample regression equation (the independent variables):$$ \begin{align} R^2 &= \dfrac{\sum (\hat{y}_j - \bar{y})^2}{\sum (y_j - \bar{y})^2}\\ &= \dfrac{\mbox{sum of squares model}}{\mbox{sum of squares total}}\\ &= 1 - \dfrac{\mbox{sum of squares error}}{\mbox{sum of squares total}}\\ &= r(y, \hat{y})^2 \end{align} $$R^2 is the proportion variance explained in the sample by the sample regression equation. It is a positively biased estimate of the proportion variance explained in the population by the population regression equation, \rho^2. If there is only one independent variable, R^2 = r^2: the correlation between the independent variable x and dependent variable y squared. • Wherry's R^2 / shrunken R^2: Corrects for the positive bias in R^2 and is equal to$$R^2_W = 1 - \frac{N - 1}{N - K - 1}(1 - R^2)$$R^2_W is a less biased estimate than R^2 of the proportion variance explained in the population by the population regression equation, \rho^2 • Stein's R^2: Estimates the proportion of variance in y that we expect the current sample regression equation to explain in a different sample drawn from the same population. It is equal to$$R^2_S = 1 - \frac{(N - 1)(N - 2)(N + 1)}{(N - K - 1)(N - K - 2)(N)}(1 - R^2)$$Per independent variable: • Correlation squared r^2_k: the proportion of the total variance in the dependent variable y that is explained by the independent variable x_k, not corrected for the other independent variables in the model • Semi-partial correlation squared sr^2_k: the proportion of the total variance in the dependent variable y that is uniquely explained by the independent variable x_k, beyond the part that is already explained by the other independent variables in the model • Partial correlation squared pr^2_k: the proportion of the variance in the dependent variable y not explained by the other independent variables, that is uniquely explained by the independent variable x_k • Proportion variance explained \eta^2 and R^2: Proportion variance of the dependent variable y explained by the independent variable:$$ \begin{align} \eta^2 = R^2 &= \dfrac{\mbox{sum of squares between}}{\mbox{sum of squares total}} \end{align} $$Only in one way ANOVA \eta^2 = R^2. \eta^2 (and R^2) is the proportion variance explained in the sample. It is a positively biased estimate of the proportion variance explained in the population. • Proportion variance explained \omega^2: Corrects for the positive bias in \eta^2 and is equal to:$$\omega^2 = \frac{\mbox{sum of squares between} - \mbox{df between} \times \mbox{mean square error}}{\mbox{sum of squares total} + \mbox{mean square error}}$$\omega^2 is a better estimate of the explained variance in the population than \eta^2. • Cohen's d: Standardized difference between the mean in group g and in group h:$$d_{g,h} = \frac{\bar{y}_g - \bar{y}_h}{s_p}$$Indicates how many standard deviations s_p two sample means are removed from each other Cohen's d: Standardized difference between the mean in group 1 and in group 2:$$d = \frac{\bar{y}_1 - \bar{y}_2}{s_p}$Indicates how many standard deviations$s_p$the two sample means are removed from each other n.a.n.a.Visual representation -- ANOVA tableANOVA tablen.a. Click the link for a step by step explanation of how to compute the sum of squares - n.a.Equivalent toEquivalent to -OLS regression with one, categorical independent variable transformed into$I - 1$code variables: •$F$test ANOVA equivalent to$F$test regression model •$t$test for contrast$i$equivalent to$t$test for regression coefficient$\beta_i$(specific contrast tested depends on how the code variables are defined) One way ANOVA with an independent variable with 2 levels ($I$= 2): • two sided two sample$t$test equivalent to ANOVA$F$test when$I$= 2 • two sample$t$test equivalent to$t$test for contrast when$I$= 2 • two sample$t$test equivalent to$t$test multiple comparisons when$I$= 2 OLS regression with one categorical independent variable with 2 levels: • two sided two sample$t$test equivalent to$F$test regression model • two sample$t$test equivalent to$t$test for regression coefficient$\beta_1\$
Example contextExample contextExample context
Can mental health be predicted from fysical health, economic class, and gender?Is the average mental health score different between people from a low, moderate, and high economic class?Is the average mental health score different between men and women? Assume that in the population, the standard deviation of mental health scores is equal amongst men and women.
SPSSSPSSSPSS
Analyze > Regression > Linear...
• Put your dependent variable in the box below Dependent and your independent (predictor) variables in the box below Independent(s)
Analyze > Compare Means > One-Way ANOVA...
• Put your dependent (quantitative) variable in the box below Dependent List and your independent (grouping) variable in the box below Factor
or
Analyze > General Linear Model > Univariate...
• Put your dependent (quantitative) variable in the box below Dependent Variable and your independent (grouping) variable in the box below Fixed Factor(s)
Analyze > Compare Means > Independent-Samples T Test...
• Put your dependent (quantitative) variable in the box below Test Variable(s) and your independent (grouping) variable in the box below Grouping Variable
• Click on the Define Groups... button. If you can't click on it, first click on the grouping variable so its background turns yellow
• Fill in the value you have used to indicate your first group in the box next to Group 1, and the value you have used to indicate your second group in the box next to Group 2
• Continue and click OK
JamoviJamoviJamovi
Regression > Linear Regression
• Put your dependent variable in the box below Dependent Variable and your independent variables of interval/ratio level in the box below Covariates
• If you also have code (dummy) variables as independent variables, you can put these in the box below Covariates as well
• Instead of transforming your categorical independent variable(s) into code variables, you can also put the untransformed categorical independent variables in the box below Factors. Jamovi will then make the code variables for you 'behind the scenes'
ANOVA > ANOVA
• Put your dependent (quantitative) variable in the box below Dependent Variable and your independent (grouping) variable in the box below Fixed Factors
T-Tests > Independent Samples T-Test
• Put your dependent (quantitative) variable in the box below Dependent Variables and your independent (grouping) variable in the box below Grouping Variable
• Under Tests, select Student's (selected by default)
• Under Hypothesis, select your alternative hypothesis
Practice questionsPractice questionsPractice questions