# Regression (OLS) - overview

This page offers structured overviews of one or more selected methods. Add additional methods for comparisons by clicking on the dropdown button in the right-hand column. To practice with a specific method click the button at the bottom row of the table

Regression (OLS)
One sample $z$ test for the mean
Kruskal-Wallis test
Independent variablesIndependent variableIndependent variable
One or more quantitative of interval or ratio level and/or one or more categorical with independent groups, transformed into code variablesNoneOne categorical with $I$ independent groups ($I \geqslant 2$)
Dependent variableDependent variableDependent variable
One quantitative of interval or ratio levelOne quantitative of interval or ratio levelOne of ordinal level
Null hypothesisNull hypothesisNull hypothesis
$F$ test for the complete regression model:
• $\beta_1 = \beta_2 = \ldots = \beta_K = 0$
or equivalenty
• The variance explained by all the independent variables together (the complete model) is 0 in the population: $\rho^2 = 0$
$t$ test for individual regression coefficient $\beta_k$:
• $\beta_k = 0$
in the regression equation $\mu_y = \beta_0 + \beta_1 \times x_1 + \beta_2 \times x_2 + \ldots + \beta_K \times x_K$
$\mu = \mu_0$
$\mu$ is the unknown population mean; $\mu_0$ is the population mean according to the null hypothesis
If the dependent variable is measured on a continuous scale and the shape of the distribution of the dependent variable is the same in all $I$ populations:
• The medians in the $I$ populations are equal
Else:
Formulation 1:
• The scores in any of the $I$ populations are not systematically higher or lower than the scores in any of the other populations
Formulation 2:
• P(an observation from population $g$ exceeds an observation from population $h$) = P(an observation from population $h$ exceeds an observation from population $g$), for each pair of groups.
Several different formulations of the null hypothesis can be found in the literature, and we do not agree with all of them. Make sure you (also) learn the one that is given in your text book or by your teacher.
Alternative hypothesisAlternative hypothesisAlternative hypothesis
$F$ test for the complete regression model:
• not all population regression coefficients are 0
or equivalenty
• The variance explained by all the independent variables together (the complete model) is larger than 0 in the population: $\rho^2 > 0$
$t$ test for individual $\beta_k$:
• Two sided: $\beta_k \neq 0$
• Right sided: $\beta_k > 0$
• Left sided: $\beta_k < 0$
Two sided: $\mu \neq \mu_0$
Right sided: $\mu > \mu_0$
Left sided: $\mu < \mu_0$
If the dependent variable is measured on a continuous scale and the shape of the distribution of the dependent variable is the same in all $I$ populations:
• Not all of the medians in the $I$ populations are equal
Else:
Formulation 1:
• The scores in some populations are systematically higher or lower than the scores in other populations
Formulation 2:
• For at least one pair of groups:
P(an observation from population $g$ exceeds an observation from population $h$) $\neq$ P(an observation from population $h$ exceeds an observation from population $g$)
AssumptionsAssumptionsAssumptions
• In the population, the residuals are normally distributed at each combination of values of the independent variables
• In the population, the standard deviation $\sigma$ of the residuals is the same for each combination of values of the independent variables (homoscedasticity)
• In the population, the relationship between the independent variables and the mean of the dependent variable $\mu_y$ is linear. If this linearity assumption holds, the mean of the residuals is 0 for each combination of values of the independent variables
• The residuals are independent of one another
• Variables are measured without error
Also pay attention to:
• Multicollinearity
• Outliers
• Scores are normally distributed in the population
• Population standard deviation $\sigma$ is known
• Sample is a simple random sample from the population. That is, observations are independent of one another
Group 1 sample is a simple random sample (SRS) from population 1, group 2 sample is an independent SRS from population 2, $\ldots$, group $I$ sample is an independent SRS from population $I$. That is, within and between groups, observations are independent of one another
Test statisticTest statisticTest statistic
$F$ test for the complete regression model:
• \begin{aligned}[t] F &= \dfrac{\sum (\hat{y}_j - \bar{y})^2 / K}{\sum (y_j - \hat{y}_j)^2 / (N - K - 1)}\\ &= \dfrac{\mbox{sum of squares model} / \mbox{degrees of freedom model}}{\mbox{sum of squares error} / \mbox{degrees of freedom error}}\\ &= \dfrac{\mbox{mean square model}}{\mbox{mean square error}} \end{aligned}
where $\hat{y}_j$ is the predicted score on the dependent variable $y$ of subject $j$, $\bar{y}$ is the mean of $y$, $y_j$ is the score on $y$ of subject $j$, $N$ is the total sample size, and $K$ is the number of independent variables
$t$ test for individual $\beta_k$:
• $t = \dfrac{b_k}{SE_{b_k}}$
• If only one independent variable:
$SE_{b_1} = \dfrac{\sqrt{\sum (y_j - \hat{y}_j)^2 / (N - 2)}}{\sqrt{\sum (x_j - \bar{x})^2}} = \dfrac{s}{\sqrt{\sum (x_j - \bar{x})^2}}$, with $s$ the sample standard deviation of the residuals, $x_j$ the score of subject $j$ on the independent variable $x$, and $\bar{x}$ the mean of $x$. For models with more than one independent variable, computing $SE_{b_k}$ becomes complicated
Note 1: mean square model is also known as mean square regression; mean square error is also known as mean square residual
Note 2: if only one independent variable ($K = 1$), the $F$ test for the complete regression model is equivalent to the two sided $t$ test for $\beta_1$
$z = \dfrac{\bar{y} - \mu_0}{\sigma / \sqrt{N}}$
$\bar{y}$ is the sample mean, $\mu_0$ is the population mean according to H0, $\sigma$ is the population standard deviation, $N$ is the sample size.

The denominator $\sigma / \sqrt{N}$ is the standard deviation of the sampling distribution of $\bar{y}$. The $z$ value indicates how many of these standard deviations $\bar{y}$ is removed from $\mu_0$

$H = \dfrac{12}{N (N + 1)} \sum \dfrac{R^2_i}{n_i} - 3(N + 1)$

Here $N$ is the total sample size, $R_i$ is the sum of ranks in group $i$, and $n_i$ is the sample size of group $i$. Remember that multiplication precedes addition, so first compute $\frac{12}{N (N + 1)} \times \sum \frac{R^2_i}{n_i}$ and then subtract $3(N + 1)$.

Note: if ties are present in the data, the formula for $H$ is more complicated.
Sample standard deviation of the residuals $s$n.a.n.a.
\begin{aligned} s &= \sqrt{\dfrac{\sum (y_j - \hat{y}_j)^2}{N - K - 1}}\\ &= \sqrt{\dfrac{\mbox{sum of squares error}}{\mbox{degrees of freedom error}}}\\ &= \sqrt{\mbox{mean square error}} \end{aligned}--
Sampling distribution of $F$ and of $t$ if H0 were trueSampling distribution of $z$ if H0 were trueSampling distribution of $H$ if H0 were true
Sampling distribution of $F$:
• $F$ distribution with $K$ (df model, numerator) and $N - K - 1$ (df error, denominator) degrees of freedom
Sampling distribution of $t$:
• $t$ distribution with $N - K - 1$ (df error) degrees of freedom
Standard normal

For large samples, approximately the chi-squared distribution with $I - 1$ degrees of freedom.

For small samples, the exact distribution of $H$ should be used.

Significant?Significant?Significant?
$F$ test:
• Check if $F$ observed in sample is equal to or larger than critical value $F^*$ or
• Find $p$ value corresponding to observed $F$ and check if it is equal to or smaller than $\alpha$
$t$ Test two sided:
$t$ Test right sided:
$t$ Test left sided:
Two sided:
Right sided:
Left sided:
For large samples, the table with critical $X^2$ values can be used. If we denote $X^2 = H$:
• Check if $X^2$ observed in sample is equal to or larger than critical value $X^{2*}$ or
• Find $p$ value corresponding to observed $X^2$ and check if it is equal to or smaller than $\alpha$
$C\%$ confidence interval for $\beta_k$ and for $\mu_y$; $C\%$ prediction interval for y_{new}$$C\% confidence interval for \mun.a. Confidence interval for \beta_k: • b_k \pm t^* \times SE_{b_k} • If only one independent variable: SE_{b_1} = \dfrac{\sqrt{\sum (y_j - \hat{y}_j)^2 / (N - 2)}}{\sqrt{\sum (x_j - \bar{x})^2}} = \dfrac{s}{\sqrt{\sum (x_j - \bar{x})^2}} Confidence interval for \mu_y, the population mean of y given the values on the independent variables: • \hat{y} \pm t^* \times SE_{\hat{y}} • If only one independent variable: SE_{\hat{y}} = s \sqrt{\dfrac{1}{N} + \dfrac{(x^* - \bar{x})^2}{\sum (x_j - \bar{x})^2}} Prediction interval for y_{new}, the score on y of a future respondent: • \hat{y} \pm t^* \times SE_{y_{new}} • If only one independent variable: SE_{y_{new}} = s \sqrt{1 + \dfrac{1}{N} + \dfrac{(x^* - \bar{x})^2}{\sum (x_j - \bar{x})^2}} In all formulas, the critical value t^* is the value under the t_{N - K - 1} distribution with the area C / 100 between -t^* and t^* (e.g. t^* = 2.086 for a 95% confidence interval when df = 20). \bar{y} \pm z^* \times \dfrac{\sigma}{\sqrt{N}} where z^* is the value under the normal curve with the area C / 100 between -z^* and z^* (e.g. z^* = 1.96 for a 95% confidence interval) The confidence interval for \mu can also be used as significance test. - Effect sizeEffect sizen.a. Complete model: • Proportion variance explained R^2: Proportion variance of the dependent variable y explained by the sample regression equation (the independent variables):$$ \begin{align} R^2 &= \dfrac{\sum (\hat{y}_j - \bar{y})^2}{\sum (y_j - \bar{y})^2}\\ &= \dfrac{\mbox{sum of squares model}}{\mbox{sum of squares total}}\\ &= 1 - \dfrac{\mbox{sum of squares error}}{\mbox{sum of squares total}}\\ &= r(y, \hat{y})^2 \end{align} $$R^2 is the proportion variance explained in the sample by the sample regression equation. It is a positively biased estimate of the proportion variance explained in the population by the population regression equation, \rho^2. If there is only one independent variable, R^2 = r^2: the correlation between the independent variable x and dependent variable y squared. • Wherry's R^2 / shrunken R^2: Corrects for the positive bias in R^2 and is equal to$$R^2_W = 1 - \frac{N - 1}{N - K - 1}(1 - R^2)$$R^2_W is a less biased estimate than R^2 of the proportion variance explained in the population by the population regression equation, \rho^2 • Stein's R^2: Estimates the proportion of variance in y that we expect the current sample regression equation to explain in a different sample drawn from the same population. It is equal to$$R^2_S = 1 - \frac{(N - 1)(N - 2)(N + 1)}{(N - K - 1)(N - K - 2)(N)}(1 - R^2)$$Per independent variable: • Correlation squared r^2_k: the proportion of the total variance in the dependent variable y that is explained by the independent variable x_k, not corrected for the other independent variables in the model • Semi-partial correlation squared sr^2_k: the proportion of the total variance in the dependent variable y that is uniquely explained by the independent variable x_k, beyond the part that is already explained by the other independent variables in the model • Partial correlation squared pr^2_k: the proportion of the variance in the dependent variable y not explained by the other independent variables, that is uniquely explained by the independent variable x_k Cohen's d: Standardized difference between the sample mean and \mu_0:$$d = \frac{\bar{y} - \mu_0}{\sigma}$Indicates how many standard deviations$\sigma$the sample mean$\bar{y}$is removed from$\mu_0$- n.a.Visual representationn.a. -- ANOVA tablen.a.n.a. -- Example contextExample contextExample context Can mental health be predicted from fysical health, economic class, and gender?Is the average mental health score of office workers different from$\mu_0$= 50? Assume that the standard deviation of the mental health scores in the population is$\sigma\$ = 3.Do people from different religions tend to score differently on social economic status?
SPSSn.a.SPSS
Analyze > Regression > Linear...
• Put your dependent variable in the box below Dependent and your independent (predictor) variables in the box below Independent(s)
-Analyze > Nonparametric Tests > Legacy Dialogs > K Independent Samples...
• Put your dependent variable in the box below Test Variable List and your independent (grouping) variable in the box below Grouping Variable
• Click on the Define Range... button. If you can't click on it, first click on the grouping variable so its background turns yellow
• Fill in the smallest value you have used to indicate your groups in the box next to Minimum, and the largest value you have used to indicate your groups in the box next to Maximum
• Continue and click OK
Jamovin.a.Jamovi
Regression > Linear Regression
• Put your dependent variable in the box below Dependent Variable and your independent variables of interval/ratio level in the box below Covariates
• If you also have code (dummy) variables as independent variables, you can put these in the box below Covariates as well
• Instead of transforming your categorical independent variable(s) into code variables, you can also put the untransformed categorical independent variables in the box below Factors. Jamovi will then make the code variables for you 'behind the scenes'
-ANOVA > One Way ANOVA - Kruskal-Wallis
• Put your dependent variable in the box below Dependent Variables and your independent (grouping) variable in the box below Grouping Variable
Practice questionsPractice questionsPractice questions