# One sample Wilcoxon signed-rank test - overview

This page offers structured overviews of one or more selected methods. Add additional methods for comparisons by clicking on the dropdown button in the right-hand column. To practice with a specific method click the button at the bottom row of the table

One sample Wilcoxon signed-rank test
Two sample $t$ test - equal variances assumed
Independent variableIndependent variable
NoneOne categorical with 2 independent groups
Dependent variableDependent variable
One of ordinal levelOne quantitative of interval or ratio level
Null hypothesisNull hypothesis
$m = m_0$
$m$ is the unknown population median; $m_0$ is the population median according to the null hypothesis
$\mu_1 = \mu_2$
$\mu_1$ is the unknown mean in population 1, $\mu_2$ is the unknown mean in population 2
Alternative hypothesisAlternative hypothesis
• Two sided: $m \neq m_0$
• Right sided: $m > m_0$
• Left sided: $m < m_0$
Two sided: $\mu_1 \neq \mu_2$
Right sided: $\mu_1 > \mu_2$
Left sided: $\mu_1 < \mu_2$
AssumptionsAssumptions
• The population distribution of the scores is symmetric
• Sample is a simple random sample from the population. That is, observations are independent of one another
• Within each population, the scores on the dependent variable are normally distributed
• The standard deviation of the scores on the dependent variable is the same in both populations: $\sigma_1 = \sigma_2$
• Group 1 sample is a simple random sample (SRS) from population 1, group 2 sample is an independent SRS from population 2. That is, within and between groups, observations are independent of one another
Test statisticTest statistic
Two different types of test statistics can be used; both will result in the same test outcome. We will denote the first option the $W_1$ statistic (also known as the $T$ statistic), and the second option the $W_2$ statistic. In order to compute each of the test statistics, follow the steps below:
1. For each subject, compute the sign of the difference score $\mbox{sign}_d = \mbox{sgn}(\mbox{score} - m_0)$. The sign is 1 if the difference is larger than zero, -1 if the diffence is smaller than zero, and 0 if the difference is equal to zero.
2. For each subject, compute the absolute value of the difference score $|\mbox{score} - m_0|$.
3. Exclude subjects with a difference score of zero. This leaves us with a remaining number of difference scores equal to $N_r$.
4. Assign ranks $R_d$ to the $N_r$ remaining absolute difference scores. The smallest absolute difference score corresponds to a rank score of 1, and the largest absolute difference score corresponds to a rank score of $N_r$. If there are ties, assign them the average of the ranks they occupy.
Then compute the test statistic:

• $W_1 = \sum\, R_d^{+}$
or
$W_1 = \sum\, R_d^{-}$
That is, sum all ranks corresponding to a positive difference or sum all ranks corresponding to a negative difference. Theoratically, both definitions will result in the same test outcome. However:
• tables with critical values for $W_1$ are usually based on the smaller of $\sum\, R_d^{+}$ and $\sum\, R_d^{-}$. So if you are using such a table, pick the smaller one.
• If you are using the normal approximation to find the $p$ value, it makes things most straightforward if you use $W_1 = \sum\, R_d^{+}$ (if you use $W_1 = \sum\, R_d^{-}$, the right and left sided alternative hypotheses 'flip').
• $W_2 = \sum\, \mbox{sign}_d \times R_d$
That is, for each remaining difference score, multiply the rank of the absolute difference score by the sign of the difference score, and then sum all of the products.
$t = \dfrac{(\bar{y}_1 - \bar{y}_2) - 0}{s_p\sqrt{\dfrac{1}{n_1} + \dfrac{1}{n_2}}} = \dfrac{\bar{y}_1 - \bar{y}_2}{s_p\sqrt{\dfrac{1}{n_1} + \dfrac{1}{n_2}}}$
$\bar{y}_1$ is the sample mean in group 1, $\bar{y}_2$ is the sample mean in group 2, $s_p$ is the pooled standard deviation, $n_1$ is the sample size of group 1, $n_2$ is the sample size of group 2. The 0 represents the difference in population means according to H0.

The denominator $s_p\sqrt{\dfrac{1}{n_1} + \dfrac{1}{n_2}}$ is the standard error of the sampling distribution of $\bar{y}_1 - \bar{y}_2$. The $t$ value indicates how many standard errors $\bar{y}_1 - \bar{y}_2$ is removed from 0.

Note: we could just as well compute $\bar{y}_2 - \bar{y}_1$ in the numerator, but then the left sided alternative becomes $\mu_2 < \mu_1$, and the right sided alternative becomes $\mu_2 > \mu_1$
n.a.Pooled standard deviation
-$s_p = \sqrt{\dfrac{(n_1 - 1) \times s^2_1 + (n_2 - 1) \times s^2_2}{n_1 + n_2 - 2}}$
Sampling distribution of $W_1$ and of $W_2$ if H0 were trueSampling distribution of $t$ if H0 were true
Sampling distribution of $W_1$:
If $N_r$ is large, $W_1$ is approximately normally distributed with mean $\mu_{W_1}$ and standard deviation $\sigma_{W_1}$ if the null hypothesis were true. Here $$\mu_{W_1} = \frac{N_r(N_r + 1)}{4}$$ $$\sigma_{W_1} = \sqrt{\frac{N_r(N_r + 1)(2N_r + 1)}{24}}$$ Hence, if $N_r$ is large, the standardized test statistic $$z = \frac{W_1 - \mu_{W_1}}{\sigma_{W_1}}$$ follows approximately a standard normal distribution if the null hypothesis were true.

Sampling distribution of $W_2$:
If $N_r$ is large, $W_2$ is approximately normally distributed with mean $0$ and standard deviation $\sigma_{W_2}$ if the null hypothesis were true. Here $$\sigma_{W_2} = \sqrt{\frac{N_r(N_r + 1)(2N_r + 1)}{6}}$$ Hence, if $N_r$ is large, the standardized test statistic $$z = \frac{W_2}{\sigma_{W_2}}$$ follows approximately a standard normal distribution if the null hypothesis were true.

If $N_r$ is small, the exact distribution of $W_1$ or $W_2$ should be used.

Note: the formula for the standard deviations $\sigma_{W_1}$ and $\sigma_{W_2}$ is more complicated if ties are present in the data.
$t$ distribution with $n_1 + n_2 - 2$ degrees of freedom
Significant?Significant?
For large samples, the table for standard normal probabilities can be used:
Two sided:
Right sided:
Left sided:
Two sided:
Right sided:
Left sided:
n.a.$C\%$ confidence interval for $\mu_1 - \mu_2$
-$(\bar{y}_1 - \bar{y}_2) \pm t^* \times s_p\sqrt{\dfrac{1}{n_1} + \dfrac{1}{n_2}}$
where the critical value $t^*$ is the value under the $t_{n_1 + n_2 - 2}$ distribution with the area $C / 100$ between $-t^*$ and $t^*$ (e.g. $t^*$ = 2.086 for a 95% confidence interval when df = 20)

The confidence interval for $\mu_1 - \mu_2$ can also be used as significance test.
n.a.Effect size
-Cohen's $d$:
Standardized difference between the mean in group $1$ and in group $2$: $$d = \frac{\bar{y}_1 - \bar{y}_2}{s_p}$$ Indicates how many standard deviations $s_p$ the two sample means are removed from each other
n.a.Visual representation
-
n.a.Equivalent to
-One way ANOVA with an independent variable with 2 levels ($I$ = 2):
• two sided two sample $t$ test equivalent to ANOVA $F$ test when $I$ = 2
• two sample $t$ test equivalent to $t$ test for contrast when $I$ = 2
• two sample $t$ test equivalent to $t$ test multiple comparisons when $I$ = 2

OLS regression with one categorical independent variable with 2 levels:
• two sided two sample $t$ test equivalent to $F$ test regression model
• two sample $t$ test equivalent to $t$ test for regression coefficient $\beta_1$
Example contextExample context
Is the median mental health score different from 50?Is the average mental health score different between men and women? Assume that in the population, the standard deviation of mental health scores is equal amongst men and women.
SPSSSPSS
Specify the measurement level of your variable on the Variable View tab, in the column named Measure. Then go to:

Analyze > Nonparametric Tests > One Sample...
• On the Objective tab, choose Customize Analysis
• On the Fields tab, specify the variable for which you want to compute the Wilcoxon signed-rank test
• On the Settings tab, choose Customize tests and check the box for 'Compare median to hypothesized (Wilcoxon signed-rank test)'. Fill in your $m_0$ in the box next to Hypothesized median
• Click Run
• Double click on the output table to see the full results
Analyze > Compare Means > Independent-Samples T Test...
• Put your dependent (quantitative) variable in the box below Test Variable(s) and your independent (grouping) variable in the box below Grouping Variable
• Click on the Define Groups... button. If you can't click on it, first click on the grouping variable so its background turns yellow
• Fill in the value you have used to indicate your first group in the box next to Group 1, and the value you have used to indicate your second group in the box next to Group 2
• Continue and click OK
JamoviJamovi
T-Tests > One Sample T-Test
• Put your variable in the box below Dependent Variables
• Under Tests, select Wilcoxon rank
• Under Hypothesis, fill in the value for $m_0$ in the box next to Test Value, and select your alternative hypothesis
T-Tests > Independent Samples T-Test
• Put your dependent (quantitative) variable in the box below Dependent Variables and your independent (grouping) variable in the box below Grouping Variable
• Under Tests, select Student's (selected by default)
• Under Hypothesis, select your alternative hypothesis
Practice questionsPractice questions