This page offers structured overviews of one or more selected methods. Add additional methods for comparisons by clicking on the dropdown button in the righthand column. To practice with a specific method click the button at the bottom row of the table
One categorical with $I$ independent groups ($I \geqslant 2$)
One within subject factor ($\geq 2$ related groups)
One categorical with $I$ independent groups ($I \geqslant 2$)
None
None
Dependent variable
Dependent variable
Dependent variable
Dependent variable
Dependent variable
Dependent variable
One categorical with $J$ independent groups ($J \geqslant 2$)
One of ordinal level
One categorical with 2 independent groups
One quantitative of interval or ratio level
One quantitative of interval or ratio level
One of ordinal level
Null hypothesis
Null hypothesis
Null hypothesis
Null hypothesis
Null hypothesis
Null hypothesis
H_{0}: the population proportions in each of the $J$ conditions are $\pi_1$, $\pi_2$, $\ldots$, $\pi_J$
or equivalently
H_{0}: the probability of drawing an observation from condition 1 is $\pi_1$, the probability of drawing an observation from condition 2 is $\pi_2$, $\ldots$,
the probability of drawing an observation from condition $J$ is $\pi_J$
If the dependent variable is measured on a continuous scale and the shape of the distribution of the dependent variable is the same in all $I$ populations:
H_{0}: the population medians for the $I$ groups are equal
Else:
Formulation 1:
H_{0}: the population scores in any of the $I$ groups are not systematically higher or lower than the population scores in any of the other groups
Formulation 2:
H_{0}:
P(an observation from population $g$ exceeds an observation from population $h$) = P(an observation from population $h$ exceeds an observation from population $g$), for each pair of groups.
Several different formulations of the null hypothesis can be found in the literature, and we do not agree with all of them. Make sure you (also) learn the one that is given in your text book or by your teacher.
H_{0}: $\pi_1 = \pi_2 = \ldots = \pi_I$
Here $\pi_1$ is the population proportion of 'successes' for group 1, $\pi_2$ is the population proportion of 'successes' for group 2, and $\pi_I$ is the population proportion of 'successes' for group $I.$
ANOVA $F$ test:
H_{0}: $\mu_1 = \mu_2 = \ldots = \mu_I$
$\mu_1$ is the population mean for group 1; $\mu_2$ is the population mean for group 2; $\mu_I$ is the population mean for group $I$
$t$ Test for contrast:
H_{0}: $\Psi = 0$
$\Psi$ is the population contrast, defined as $\Psi = \sum a_i\mu_i$. Here $\mu_i$ is the population mean for group $i$ and $a_i$ is the coefficient for $\mu_i$. The coefficients $a_i$ sum to 0.
$t$ Test multiple comparisons:
H_{0}: $\mu_g = \mu_h$
$\mu_g$ is the population mean for group $g$; $\mu_h$ is the population mean for group $h$
H_{0}: $\mu = \mu_0$
Here $\mu$ is the population mean, and $\mu_0$ is the population mean according to the null hypothesis.
H_{0}: $m = m_0$
Here $m$ is the population median, and $m_0$ is the population median according to the null hypothesis.
Alternative hypothesis
Alternative hypothesis
Alternative hypothesis
Alternative hypothesis
Alternative hypothesis
Alternative hypothesis
H_{1}: the population proportions are not all as specified under the null hypothesis
or equivalently
H_{1}: the probabilities of drawing an observation from each of the conditions are not all as specified under the null hypothesis
If the dependent variable is measured on a continuous scale and the shape of the distribution of the dependent variable is the same in all $I$ populations:
H_{1}: not all of the population medians for the $I$ groups are equal
Else:
Formulation 1:
H_{1}:
the poplation scores in some groups are systematically higher or lower than the population scores in other groups
Formulation 2:
H_{1}:
for at least one pair of groups:
P(an observation from population $g$ exceeds an observation from population $h$) $\neq$ P(an observation from population $h$ exceeds an observation from population $g$)
H_{1}: not all population proportions are equal
ANOVA $F$ test:
H_{1}: not all population means are equal
$t$ Test for contrast:
H_{1} two sided: $\Psi \neq 0$
H_{1} right sided: $\Psi > 0$
H_{1} left sided: $\Psi < 0$
$t$ Test multiple comparisons:
H_{1}  usually two sided: $\mu_g \neq \mu_h$
H_{1} two sided: $\mu \neq \mu_0$
H_{1} right sided: $\mu > \mu_0$
H_{1} left sided: $\mu < \mu_0$
H_{1} two sided: $m \neq m_0$
H_{1} right sided: $m > m_0$
H_{1} left sided: $m < m_0$
Assumptions
Assumptions
Assumptions
Assumptions
Assumptions
Assumptions
Sample size is large enough for $X^2$ to be approximately chisquared distributed. Rule of thumb: all $J$ expected cell counts are 5 or more
Sample is a simple random sample from the population. That is, observations are independent of one another
Group 1 sample is a simple random sample (SRS) from population 1, group 2 sample is an independent SRS from population 2, $\ldots$, group $I$ sample is an independent SRS from population $I$. That is, within and between groups, observations are independent of one another
Sample of 'blocks' (usually the subjects) is a simple random sample from the population. That is, blocks are independent of one another
Within each population, the scores on the dependent variable are normally distributed
The standard deviation of the scores on the dependent variable is the same in each of the populations: $\sigma_1 = \sigma_2 = \ldots = \sigma_I$
Group 1 sample is a simple random sample (SRS) from population 1, group 2 sample is an independent SRS from population 2, $\ldots$, group $I$ sample is an independent SRS from population $I$. That is, within and between groups, observations are independent of one another
Scores are normally distributed in the population
Population standard deviation $\sigma$ is known
Sample is a simple random sample from the population. That is, observations are independent of one another
The population distribution of the scores is symmetric
Sample is a simple random sample from the population. That is, observations are independent of one another
Test statistic
Test statistic
Test statistic
Test statistic
Test statistic
Test statistic
$X^2 = \sum{\frac{(\mbox{observed cell count}  \mbox{expected cell count})^2}{\mbox{expected cell count}}}$
Here the expected cell count for one cell = $N \times \pi_j$, the observed cell count is the observed sample count in that same cell, and the sum is over all $J$ cells.
Here $N$ is the total sample size, $R_i$ is the sum of ranks in group $i$, and $n_i$ is the sample size of group $i$. Remember that multiplication precedes addition, so first compute $\frac{12}{N (N + 1)} \times \sum \frac{R^2_i}{n_i}$ and then subtract $3(N + 1)$.
Note: if ties are present in the data, the formula for $H$ is more complicated.
If a failure is scored as 0 and a success is scored as 1:
Here $k$ is the number of related groups (usually the number of repeated measurements), a group total is the sum of the scores in a group, a block total is the sum of the scores in a block (usually a subject), and the grand total is the sum of all the scores.
Before computing $Q$, first exclude blocks with equal scores in all $k$ groups.
ANOVA $F$ test:
$\begin{aligned}[t]
F &= \dfrac{\sum\nolimits_{subjects} (\mbox{subject's group mean}  \mbox{overall mean})^2 / (I  1)}{\sum\nolimits_{subjects} (\mbox{subject's score}  \mbox{its group mean})^2 / (N  I)}\\
&= \dfrac{\mbox{sum of squares between} / \mbox{degrees of freedom between}}{\mbox{sum of squares error} / \mbox{degrees of freedom error}}\\
&= \dfrac{\mbox{mean square between}}{\mbox{mean square error}}
\end{aligned}
$
where $N$ is the total sample size, and $I$ is the number of groups.
Note: mean square between is also known as mean square model, and mean square error is also known as mean square residual or mean square within.
$t$ Test for contrast:
$t = \dfrac{c}{s_p\sqrt{\sum \dfrac{a^2_i}{n_i}}}$
Here $c$ is the sample estimate of the population contrast $\Psi$: $c = \sum a_i\bar{y}_i$, with $\bar{y}_i$ the sample mean in group $i$. $s_p$ is the pooled standard deviation based on all the $I$ groups in the ANOVA, $a_i$ is the contrast coefficient for group $i$, and $n_i$ is the sample size of group $i$.
Note that if the contrast compares only two group means with each other, this $t$ statistic is very similar to the two sample $t$ statistic (assuming equal population standard deviations). In that case the only difference is that we now base the pooled standard deviation on all the $I$ groups, which affects the $t$ value if $I \geqslant 3$. It also affects the corresponding degrees of freedom.
$t$ Test multiple comparisons:
$t = \dfrac{\bar{y}_g  \bar{y}_h}{s_p\sqrt{\dfrac{1}{n_g} + \dfrac{1}{n_h}}}$
$\bar{y}_g$ is the sample mean in group $g$, $\bar{y}_h$ is the sample mean in group $h$,
$s_p$ is the pooled standard deviation based on all the $I$ groups in the ANOVA,
$n_g$ is the sample size of group $g$, and $n_h$ is the sample size of group $h$.
Note that this $t$ statistic is very similar to the two sample $t$ statistic (assuming equal population standard deviations). The only difference is that we now base the pooled standard deviation on all the $I$ groups, which affects the $t$ value if $I \geqslant 3$. It also affects the corresponding degrees of freedom.
$z = \dfrac{\bar{y}  \mu_0}{\sigma / \sqrt{N}}$
Here $\bar{y}$ is the sample mean, $\mu_0$ is the population mean according to the null hypothesis, $\sigma$ is the population standard deviation, and $N$ is the sample size.
Two different types of test statistics can be used, but both will result in the same test outcome. We will denote the first option the $W_1$ statistic (also known as the $T$ statistic), and the second option the $W_2$ statistic.
In order to compute each of the test statistics, follow the steps below:
For each subject, compute the sign of the difference score $\mbox{sign}_d = \mbox{sgn}(\mbox{score}  m_0)$. The sign is 1 if the difference is larger than zero, 1 if the diffence is smaller than zero, and 0 if the difference is equal to zero.
For each subject, compute the absolute value of the difference score $\mbox{score}  m_0$.
Exclude subjects with a difference score of zero. This leaves us with a remaining number of difference scores equal to $N_r$.
Assign ranks $R_d$ to the $N_r$ remaining absolute difference scores. The smallest absolute difference score corresponds to a rank score of 1, and the largest absolute difference score corresponds to a rank score of $N_r$. If there are ties, assign them the average of the ranks they occupy.
Then compute the test statistic:
$W_1 = \sum\, R_d^{+}$
or
$W_1 = \sum\, R_d^{}$
That is, sum all ranks corresponding to a positive difference or sum all ranks corresponding to a negative difference. Theoratically, both definitions will result in the same test outcome. However:
Tables with critical values for $W_1$ are usually based on the smaller of $\sum\, R_d^{+}$ and $\sum\, R_d^{}$. So if you are using such a table, pick the smaller one.
If you are using the normal approximation to find the $p$ value, it makes things most straightforward if you use $W_1 = \sum\, R_d^{+}$ (if you use $W_1 = \sum\, R_d^{}$, the right and left sided alternative hypotheses 'flip').
$W_2 = \sum\, \mbox{sign}_d \times R_d$
That is, for each remaining difference score, multiply the rank of the absolute difference score by the sign of the difference score, and then sum all of the products.
Sampling distribution of $W_1$ and of $W_2$ if H_{0} were true
Approximately the chisquared distribution with $J  1$ degrees of freedom
For large samples, approximately the chisquared distribution with $I  1$ degrees of freedom.
For small samples, the exact distribution of $H$ should be used.
If the number of blocks (usually the number of subjects) is large, approximately the chisquared distribution with $k  1$ degrees of freedom
Sampling distribution of $F$:
$F$ distribution with $I  1$ (df between, numerator) and $N  I$ (df error, denominator) degrees of freedom
Sampling distribution of $t$:
$t$ distribution with $N  I$ degrees of freedom
Standard normal distribution
Sampling distribution of $W_1$:
If $N_r$ is large, $W_1$ is approximately normally distributed with mean $\mu_{W_1}$ and standard deviation $\sigma_{W_1}$ if the null hypothesis were true. Here
$$\mu_{W_1} = \frac{N_r(N_r + 1)}{4}$$
$$\sigma_{W_1} = \sqrt{\frac{N_r(N_r + 1)(2N_r + 1)}{24}}$$
Hence, if $N_r$ is large, the standardized test statistic
$$z = \frac{W_1  \mu_{W_1}}{\sigma_{W_1}}$$
follows approximately the standard normal distribution if the null hypothesis were true.
Sampling distribution of $W_2$:
If $N_r$ is large, $W_2$ is approximately normally distributed with mean $0$ and standard deviation $\sigma_{W_2}$ if the null hypothesis were true. Here
$$\sigma_{W_2} = \sqrt{\frac{N_r(N_r + 1)(2N_r + 1)}{6}}$$
Hence, if $N_r$ is large, the standardized test statistic
$$z = \frac{W_2}{\sigma_{W_2}}$$
follows approximately the standard normal distribution if the null hypothesis were true.
If $N_r$ is small, the exact distribution of $W_1$ or $W_2$ should be used.
Note: if ties are present in the data, the formula for the standard deviations $\sigma_{W_1}$ and $\sigma_{W_2}$ is more complicated.
Find $p$ value corresponding to observed $X^2$ and check if it is equal to or smaller than $\alpha$
$F$ test:
Check if $F$ observed in sample is equal to or larger than critical value $F^*$ or
Find $p$ value corresponding to observed $F$ and check if it is equal to or smaller than $\alpha$ (e.g. .01 < $p$ < .025 when $F$ = 3.91, df between = 4, and df error = 20)
$t$ Test for contrast two sided:
Check if $t$ observed in sample is at least as extreme as critical value $t^*$ or
Find two sided $p$ value corresponding to observed $t$ and check if it is equal to or smaller than $\alpha$
$t$ Test for contrast right sided:
Check if $t$ observed in sample is equal to or larger than critical value $t^*$ or
Find right sided $p$ value corresponding to observed $t$ and check if it is equal to or smaller than $\alpha$
$t$ Test for contrast left sided:
Check if $t$ observed in sample is equal to or smaller than critical value $t^*$ or
Find left sided $p$ value corresponding to observed $t$ and check if it is equal to or smaller than $\alpha$
$t$ Test multiple comparisons two sided:
Check if $t$ observed in sample is at least as extreme as critical value $t^{**}$. Adapt $t^{**}$ according to a multiple comparison procedure (e.g., Bonferroni) or
Find two sided $p$ value corresponding to observed $t$ and check if it is equal to or smaller than $\alpha$. Adapt the $p$ value or $\alpha$ according to a multiple comparison procedure
$t$ Test multiple comparisons right sided
Check if $t$ observed in sample is equal to or larger than critical value $t^{**}$. Adapt $t^{**}$ according to a multiple comparison procedure (e.g., Bonferroni) or
Find right sided $p$ value corresponding to observed $t$ and check if it is equal to or smaller than $\alpha$. Adapt the $p$ value or $\alpha$ according to a multiple comparison procedure
$t$ Test multiple comparisons left sided
Check if $t$ observed in sample is equal to or smaller than critical value $t^{**}$. Adapt $t^{**}$ according to a multiple comparison procedure (e.g., Bonferroni) or
Find left sided $p$ value corresponding to observed $t$ and check if it is equal to or smaller than $\alpha$. Adapt the $p$ value or $\alpha$ according to a multiple comparison procedure
Two sided:
Check if $z$ observed in sample is at least as extreme as critical value $z^*$ or
Find two sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
Right sided:
Check if $z$ observed in sample is equal to or larger than critical value $z^*$ or
Find right sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
Left sided:
Check if $z$ observed in sample is equal to or smaller than critical value $z^*$ or
Find left sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
For large samples, the table for standard normal probabilities can be used:
Two sided:
Check if $z$ observed in sample is at least as extreme as critical value $z^*$ or
Find two sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
Right sided:
Check if $z$ observed in sample is equal to or larger than critical value $z^*$ or
Find right sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
Left sided:
Check if $z$ observed in sample is equal to or smaller than critical value $z^*$ or
Find left sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
n.a.
n.a.
n.a.
$C\%$ confidence interval for $\Psi$, for $\mu_g  \mu_h$, and for $\mu_i$
$C\%$ confidence interval for $\mu$
n.a.



Confidence interval for $\Psi$ (contrast):
$c \pm t^* \times s_p\sqrt{\sum \dfrac{a^2_i}{n_i}}$
where the critical value $t^*$ is the value under the $t_{N  I}$ distribution with the area $C / 100$ between $t^*$ and $t^*$ (e.g. $t^*$ = 2.086 for a 95% confidence interval when df = 20). Note that $n_i$ is the sample size of group $i$, and $N$ is the total sample size, based on all the $I$ groups.
Confidence interval for $\mu_g  \mu_h$ (multiple comparisons):
$(\bar{y}_g  \bar{y}_h) \pm t^{**} \times s_p\sqrt{\dfrac{1}{n_g} + \dfrac{1}{n_h}}$
where $t^{**}$ depends upon $C$, degrees of freedom ($N  I$), and the multiple comparison procedure. If you do not want to apply a multiple comparison procedure, $t^{**} = t^* = $ the value under the $t_{N  I}$ distribution with the area $C / 100$ between $t^*$ and $t^*$. Note that $n_g$ is the sample size of group $g$, $n_h$ is the sample size of group $h$, and $N$ is the total sample size, based on all the $I$ groups.
Confidence interval for single population mean $\mu_i$:
$\bar{y}_i \pm t^* \times \dfrac{s_p}{\sqrt{n_i}}$
where $\bar{y}_i$ is the sample mean in group $i$, $n_i$ is the sample size of group $i$, and the critical value $t^*$ is the value under the $t_{N  I}$ distribution with the area $C / 100$ between $t^*$ and $t^*$ (e.g. $t^*$ = 2.086 for a 95% confidence interval when df = 20). Note that $n_i$ is the sample size of group $i$, and $N$ is the total sample size, based on all the $I$ groups.
$\bar{y} \pm z^* \times \dfrac{\sigma}{\sqrt{N}}$
where the critical value $z^*$ is the value under the normal curve with the area $C / 100$ between $z^*$ and $z^*$ (e.g. $z^*$ = 1.96 for a 95% confidence interval).
Proportion variance explained $\eta^2$ and $R^2$:
Proportion variance of the dependent variable $y$ explained by the independent variable:
$$
\begin{align}
\eta^2 = R^2
&= \dfrac{\mbox{sum of squares between}}{\mbox{sum of squares total}}
\end{align}
$$
Only in one way ANOVA $\eta^2 = R^2.$ $\eta^2$ (and $R^2$) is the proportion variance explained in the sample. It is a positively biased estimate of the proportion variance explained in the population.
Proportion variance explained $\omega^2$:
Corrects for the positive bias in $\eta^2$ and is equal to:
$$\omega^2 = \frac{\mbox{sum of squares between}  \mbox{df between} \times \mbox{mean square error}}{\mbox{sum of squares total} + \mbox{mean square error}}$$
$\omega^2$ is a better estimate of the explained variance in the population than $\eta^2.$
Cohen's $d$:
Standardized difference between the mean in group $g$ and in group $h$:
$$d_{g,h} = \frac{\bar{y}_g  \bar{y}_h}{s_p}$$
Cohen's $d$ indicates how many standard deviations $s_p$ two sample means are removed from each other.
Cohen's $d$:
Standardized difference between the sample mean and $\mu_0$:
$$d = \frac{\bar{y}  \mu_0}{\sigma}$$
Cohen's $d$ indicates how many standard deviations $\sigma$ the sample mean $\bar{y}$ is removed from $\mu_0.$
Friedman test, with a categorical dependent variable consisting of two independent groups.
OLS regression with one categorical independent variable transformed into $I  1$ code variables:
$F$ test ANOVA is equivalent to $F$ test regression model
$t$ test for contrast $i$ is equivalent to $t$ test for regression coefficient $\beta_i$ (specific contrast tested depends on how the code variables are defined)


Example context
Example context
Example context
Example context
Example context
Example context
Is the proportion of people with a low, moderate, and high social economic status in the population different from $\pi_{low} = 0.2,$ $\pi_{moderate} = 0.6,$ and $\pi_{high} = 0.2$?
Do people from different religions tend to score differently on social economic status?
Subjects perform three different tasks, which they can either perform correctly or incorrectly. Is there a difference in task performance between the three different tasks?
Is the average mental health score different between people from a low, moderate, and high economic class?
Is the average mental health score of office workers different from $\mu_0 = 50$? Assume that the standard deviation of the mental health scores in the population is $\sigma = 3.$
Is the median mental health score of office workers different from $m_0 = 50$?
Put your categorical variable in the box below Test Variable List
Fill in the population proportions / probabilities according to $H_0$ in the box below Expected Values. If $H_0$ states that they are all equal, just pick 'All categories equal' (default)
Put your dependent variable in the box below Test Variable List and your independent (grouping) variable in the box below Grouping Variable
Click on the Define Range... button. If you can't click on it, first click on the grouping variable so its background turns yellow
Fill in the smallest value you have used to indicate your groups in the box next to Minimum, and the largest value you have used to indicate your groups in the box next to Maximum
Continue and click OK
Analyze > Nonparametric Tests > Legacy Dialogs > K Related Samples...
Put the $k$ variables containing the scores for the $k$ related groups in the white box below Test Variables
Under Test Type, select Cochran's Q test
Analyze > Compare Means > OneWay ANOVA...
Put your dependent (quantitative) variable in the box below Dependent List and your independent (grouping) variable in the box below Factor
or
Analyze > General Linear Model > Univariate...
Put your dependent (quantitative) variable in the box below Dependent Variable and your independent (grouping) variable in the box below Fixed Factor(s)

Specify the measurement level of your variable on the Variable View tab, in the column named Measure. Then go to:
Analyze > Nonparametric Tests > One Sample...
On the Objective tab, choose Customize Analysis
On the Fields tab, specify the variable for which you want to compute the Wilcoxon signedrank test
On the Settings tab, choose Customize tests and check the box for 'Compare median to hypothesized (Wilcoxon signedrank test)'. Fill in your $m_0$ in the box next to Hypothesized median
Click Run
Double click on the output table to see the full results
Jamovi
Jamovi
Jamovi
Jamovi
n.a.
Jamovi
Frequencies > N Outcomes  $\chi^2$ Goodness of fit
Put your categorical variable in the box below Variable
Click on Expected Proportions and fill in the population proportions / probabilities according to $H_0$ in the boxes below Ratio. If $H_0$ states that they are all equal, you can leave the ratios equal to the default values (1)
ANOVA > One Way ANOVA  KruskalWallis
Put your dependent variable in the box below Dependent Variables and your independent (grouping) variable in the box below Grouping Variable
Jamovi does not have a specific option for the Cochran's Q test. However, you can do the Friedman test instead. The $p$ value resulting from this Friedman test is equivalent to the $p$ value that would have resulted from the Cochran's Q test. Go to:
ANOVA > Repeated Measures ANOVA  Friedman
Put the $k$ variables containing the scores for the $k$ related groups in the box below Measures
ANOVA > ANOVA
Put your dependent (quantitative) variable in the box below Dependent Variable and your independent (grouping) variable in the box below Fixed Factors

TTests > One Sample TTest
Put your variable in the box below Dependent Variables
Under Tests, select Wilcoxon rank
Under Hypothesis, fill in the value for $m_0$ in the box next to Test Value, and select your alternative hypothesis