One sample Wilcoxon signed-rank test overview

This page offers structured overviews of one or more selected methods. Add additional methods for comparisons by clicking on the dropdown button in the right-hand column. To practice with a specific method click the button at the bottom row of the table

One sample Wilcoxon signed-rank test	Mann-Whitney-Wilcoxon test	Goodness of fit test	Cochran's Q test
Independent variable	Independent/grouping variable	Independent variable	Independent/grouping variable
None	One categorical with 2 independent groups	None	One within subject factor ($\geq 2$ related groups)
Dependent variable	Dependent variable	Dependent variable	Dependent variable
One of ordinal level	One of ordinal level	One categorical with $J$ independent groups ($J \geqslant 2$)	One categorical with 2 independent groups
Null hypothesis	Null hypothesis	Null hypothesis	Null hypothesis
H₀: $m = m_0$ Here $m$ is the population median, and $m_0$ is the population median according to the null hypothesis.	If the dependent variable is measured on a continuous scale and the shape of the distribution of the dependent variable is the same in both populations: H₀: the population median for group 1 is equal to the population median for group 2 Else: Formulation 1: H₀: the population scores in group 1 are not systematically higher or lower than the population scores in group 2 Formulation 2: H₀: P(an observation from population 1 exceeds an observation from population 2) = P(an observation from population 2 exceeds observation from population 1) Several different formulations of the null hypothesis can be found in the literature, and we do not agree with all of them. Make sure you (also) learn the one that is given in your text book or by your teacher.	H₀: the population proportions in each of the $J$ conditions are $\pi_1$, $\pi_2$, $\ldots$, $\pi_J$ or equivalently H₀: the probability of drawing an observation from condition 1 is $\pi_1$, the probability of drawing an observation from condition 2 is $\pi_2$, $\ldots$, the probability of drawing an observation from condition $J$ is $\pi_J$	H₀: $\pi_1 = \pi_2 = \ldots = \pi_I$ Here $\pi_1$ is the population proportion of 'successes' for group 1, $\pi_2$ is the population proportion of 'successes' for group 2, and $\pi_I$ is the population proportion of 'successes' for group $I.$
Alternative hypothesis	Alternative hypothesis	Alternative hypothesis	Alternative hypothesis
H₁ two sided: $m \neq m_0$ H₁ right sided: $m > m_0$ H₁ left sided: $m < m_0$	If the dependent variable is measured on a continuous scale and the shape of the distribution of the dependent variable is the same in both populations: H₁ two sided: the population median for group 1 is not equal to the population median for group 2 H₁ right sided: the population median for group 1 is larger than the population median for group 2 H₁ left sided: the population median for group 1 is smaller than the population median for group 2 Else: Formulation 1: H₁ two sided: the population scores in group 1 are systematically higher or lower than the population scores in group 2 H₁ right sided: the population scores in group 1 are systematically higher than the population scores in group 2 H₁ left sided: the population scores in group 1 are systematically lower than the population scores in group 2 Formulation 2: H₁ two sided: P(an observation from population 1 exceeds an observation from population 2) $\neq$ P(an observation from population 2 exceeds an observation from population 1) H₁ right sided: P(an observation from population 1 exceeds an observation from population 2) > P(an observation from population 2 exceeds an observation from population 1) H₁ left sided: P(an observation from population 1 exceeds an observation from population 2) < P(an observation from population 2 exceeds an observation from population 1)	H₁: the population proportions are not all as specified under the null hypothesis or equivalently H₁: the probabilities of drawing an observation from each of the conditions are not all as specified under the null hypothesis	H₁: not all population proportions are equal
Assumptions	Assumptions	Assumptions	Assumptions
The population distribution of the scores is symmetric Sample is a simple random sample from the population. That is, observations are independent of one another	Group 1 sample is a simple random sample (SRS) from population 1, group 2 sample is an independent SRS from population 2. That is, within and between groups, observations are independent of one another	Sample size is large enough for $X^2$ to be approximately chi-squared distributed. Rule of thumb: all $J$ expected cell counts are 5 or more Sample is a simple random sample from the population. That is, observations are independent of one another	Sample of 'blocks' (usually the subjects) is a simple random sample from the population. That is, blocks are independent of one another
Test statistic	Test statistic	Test statistic	Test statistic
Two different types of test statistics can be used, but both will result in the same test outcome. We will denote the first option the $W_1$ statistic (also known as the $T$ statistic), and the second option the $W_2$ statistic. In order to compute each of the test statistics, follow the steps below: For each subject, compute the sign of the difference score $\mbox{sign}_d = \mbox{sgn}(\mbox{score} - m_0)$. The sign is 1 if the difference is larger than zero, -1 if the diffence is smaller than zero, and 0 if the difference is equal to zero. For each subject, compute the absolute value of the difference score $\|\mbox{score} - m_0\|$. Exclude subjects with a difference score of zero. This leaves us with a remaining number of difference scores equal to $N_r$. Assign ranks $R_d$ to the $N_r$ remaining absolute difference scores. The smallest absolute difference score corresponds to a rank score of 1, and the largest absolute difference score corresponds to a rank score of $N_r$. If there are ties, assign them the average of the ranks they occupy. Then compute the test statistic: $W_1 = \sum\, R_d^{+}$ or $W_1 = \sum\, R_d^{-}$ That is, sum all ranks corresponding to a positive difference or sum all ranks corresponding to a negative difference. Theoratically, both definitions will result in the same test outcome. However: Tables with critical values for $W_1$ are usually based on the smaller of $\sum\, R_d^{+}$ and $\sum\, R_d^{-}$. So if you are using such a table, pick the smaller one. If you are using the normal approximation to find the $p$ value, it makes things most straightforward if you use $W_1 = \sum\, R_d^{+}$ (if you use $W_1 = \sum\, R_d^{-}$, the right and left sided alternative hypotheses 'flip'). $W_2 = \sum\, \mbox{sign}_d \times R_d$ That is, for each remaining difference score, multiply the rank of the absolute difference score by the sign of the difference score, and then sum all of the products.	Two different types of test statistics can be used; both will result in the same test outcome. The first is the Wilcoxon rank sum statistic $W$: $W$ = sum of ranks in group 1 The second type of test statistic is the Mann-Whitney $U$ statistic: $U = W - \dfrac{n_1(n_1 + 1)}{2}$ where $n_1$ is the sample size of group 1. Note: we could just as well base W and U on group 2. This would only 'flip' the right and left sided alternative hypotheses. Also, tables with critical values for $U$ are often based on the smaller of $U$ for group 1 and for group 2.	$X^2 = \sum{\frac{(\mbox{observed cell count} - \mbox{expected cell count})^2}{\mbox{expected cell count}}}$ Here the expected cell count for one cell = $N \times \pi_j$, the observed cell count is the observed sample count in that same cell, and the sum is over all $J$ cells.	If a failure is scored as 0 and a success is scored as 1: $Q = k(k - 1) \dfrac{\sum_{groups} \Big (\mbox{group total} - \frac{\mbox{grand total}}{k} \Big)^2}{\sum_{blocks} \mbox{block total} \times (k - \mbox{block total})}$ Here $k$ is the number of related groups (usually the number of repeated measurements), a group total is the sum of the scores in a group, a block total is the sum of the scores in a block (usually a subject), and the grand total is the sum of all the scores. Before computing $Q$, first exclude blocks with equal scores in all $k$ groups.
Sampling distribution of $W_1$ and of $W_2$ if H₀ were true	Sampling distribution of $W$ and of $U$ if H₀ were true	Sampling distribution of $X^2$ if H₀ were true	Sampling distribution of $Q$ if H₀ were true
Sampling distribution of $W_1$: If $N_r$ is large, $W_1$ is approximately normally distributed with mean $\mu_{W_1}$ and standard deviation $\sigma_{W_1}$ if the null hypothesis were true. Here $$\mu_{W_1} = \frac{N_r(N_r + 1)}{4}$$ $$\sigma_{W_1} = \sqrt{\frac{N_r(N_r + 1)(2N_r + 1)}{24}}$$ Hence, if $N_r$ is large, the standardized test statistic $$z = \frac{W_1 - \mu_{W_1}}{\sigma_{W_1}}$$ follows approximately the standard normal distribution if the null hypothesis were true. Sampling distribution of $W_2$: If $N_r$ is large, $W_2$ is approximately normally distributed with mean $0$ and standard deviation $\sigma_{W_2}$ if the null hypothesis were true. Here $$\sigma_{W_2} = \sqrt{\frac{N_r(N_r + 1)(2N_r + 1)}{6}}$$ Hence, if $N_r$ is large, the standardized test statistic $$z = \frac{W_2}{\sigma_{W_2}}$$ follows approximately the standard normal distribution if the null hypothesis were true. If $N_r$ is small, the exact distribution of $W_1$ or $W_2$ should be used. Note: if ties are present in the data, the formula for the standard deviations $\sigma_{W_1}$ and $\sigma_{W_2}$ is more complicated.	Sampling distribution of $W$: For large samples, $W$ is approximately normally distributed with mean $\mu_W$ and standard deviation $\sigma_W$ if the null hypothesis were true. Here $$ \begin{aligned} \mu_W &= \dfrac{n_1(n_1 + n_2 + 1)}{2}\\ \sigma_W &= \sqrt{\dfrac{n_1 n_2(n_1 + n_2 + 1)}{12}} \end{aligned} $$ Hence, for large samples, the standardized test statistic $$ z_W = \dfrac{W - \mu_W}{\sigma_W}\\ $$ follows approximately the standard normal distribution if the null hypothesis were true. Note that if your $W$ value is based on group 2, $\mu_W$ becomes $\frac{n_2(n_1 + n_2 + 1)}{2}$. Sampling distribution of $U$: For large samples, $U$ is approximately normally distributed with mean $\mu_U$ and standard deviation $\sigma_U$ if the null hypothesis were true. Here $$ \begin{aligned} \mu_U &= \dfrac{n_1 n_2}{2}\\ \sigma_U &= \sqrt{\dfrac{n_1 n_2(n_1 + n_2 + 1)}{12}} \end{aligned} $$ Hence, for large samples, the standardized test statistic $$ z_U = \dfrac{U - \mu_U}{\sigma_U}\\ $$ follows approximately the standard normal distribution if the null hypothesis were true. For small samples, the exact distribution of $W$ or $U$ should be used. Note: if ties are present in the data, the formula for the standard deviations $\sigma_W$ and $\sigma_U$ is more complicated.	Approximately the chi-squared distribution with $J - 1$ degrees of freedom	If the number of blocks (usually the number of subjects) is large, approximately the chi-squared distribution with $k - 1$ degrees of freedom
Significant?	Significant?	Significant?	Significant?
For large samples, the table for standard normal probabilities can be used: Two sided: Check if $z$ observed in sample is at least as extreme as critical value $z^$ or Find two sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$ Right sided: Check if $z$ observed in sample is equal to or larger than critical value $z^$ or Find right sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$ Left sided: Check if $z$ observed in sample is equal to or smaller than critical value $z^*$ or Find left sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$	For large samples, the table for standard normal probabilities can be used: Two sided: Check if $z$ observed in sample is at least as extreme as critical value $z^$ or Find two sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$ Right sided: Check if $z$ observed in sample is equal to or larger than critical value $z^$ or Find right sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$ Left sided: Check if $z$ observed in sample is equal to or smaller than critical value $z^*$ or Find left sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$	Check if $X^2$ observed in sample is equal to or larger than critical value $X^{2*}$ or Find $p$ value corresponding to observed $X^2$ and check if it is equal to or smaller than $\alpha$	If the number of blocks is large, the table with critical $X^2$ values can be used. If we denote $X^2 = Q$: Check if $X^2$ observed in sample is equal to or larger than critical value $X^{2*}$ or Find $p$ value corresponding to observed $X^2$ and check if it is equal to or smaller than $\alpha$
n.a.	Equivalent to	n.a.	Equivalent to
-	If there are no ties in the data, the two sided Mann-Whitney-Wilcoxon test is equivalent to the Kruskal-Wallis test with an independent variable with 2 levels ($I$ = 2).	-	Friedman test, with a categorical dependent variable consisting of two independent groups.
Example context	Example context	Example context	Example context
Is the median mental health score of office workers different from $m_0 = 50$?	Do men tend to score higher on social economic status than women?	Is the proportion of people with a low, moderate, and high social economic status in the population different from $\pi_{low} = 0.2,$ $\pi_{moderate} = 0.6,$ and $\pi_{high} = 0.2$?	Subjects perform three different tasks, which they can either perform correctly or incorrectly. Is there a difference in task performance between the three different tasks?
SPSS	SPSS	SPSS	SPSS
Specify the measurement level of your variable on the Variable View tab, in the column named Measure. Then go to: Analyze > Nonparametric Tests > One Sample... On the Objective tab, choose Customize Analysis On the Fields tab, specify the variable for which you want to compute the Wilcoxon signed-rank test On the Settings tab, choose Customize tests and check the box for 'Compare median to hypothesized (Wilcoxon signed-rank test)'. Fill in your $m_0$ in the box next to Hypothesized median Click Run Double click on the output table to see the full results	Analyze > Nonparametric Tests > Legacy Dialogs > 2 Independent Samples... Put your dependent variable in the box below Test Variable List and your independent (grouping) variable in the box below Grouping Variable Click on the Define Groups... button. If you can't click on it, first click on the grouping variable so its background turns yellow Fill in the value you have used to indicate your first group in the box next to Group 1, and the value you have used to indicate your second group in the box next to Group 2 Continue and click OK	Analyze > Nonparametric Tests > Legacy Dialogs > Chi-square... Put your categorical variable in the box below Test Variable List Fill in the population proportions / probabilities according to $H_0$ in the box below Expected Values. If $H_0$ states that they are all equal, just pick 'All categories equal' (default)	Analyze > Nonparametric Tests > Legacy Dialogs > K Related Samples... Put the $k$ variables containing the scores for the $k$ related groups in the white box below Test Variables Under Test Type, select Cochran's Q test
Jamovi	Jamovi	Jamovi	Jamovi
T-Tests > One Sample T-Test Put your variable in the box below Dependent Variables Under Tests, select Wilcoxon rank Under Hypothesis, fill in the value for $m_0$ in the box next to Test Value, and select your alternative hypothesis	T-Tests > Independent Samples T-Test Put your dependent variable in the box below Dependent Variables and your independent (grouping) variable in the box below Grouping Variable Under Tests, select Mann-Whitney U Under Hypothesis, select your alternative hypothesis	Frequencies > N Outcomes - $\chi^2$ Goodness of fit Put your categorical variable in the box below Variable Click on Expected Proportions and fill in the population proportions / probabilities according to $H_0$ in the boxes below Ratio. If $H_0$ states that they are all equal, you can leave the ratios equal to the default values (1)	Jamovi does not have a specific option for the Cochran's Q test. However, you can do the Friedman test instead. The $p$ value resulting from this Friedman test is equivalent to the $p$ value that would have resulted from the Cochran's Q test. Go to: ANOVA > Repeated Measures ANOVA - Friedman Put the $k$ variables containing the scores for the $k$ related groups in the box below Measures
Practice questions	Practice questions	Practice questions	Practice questions

One sample Wilcoxon signed-rank test - overview