# One sample Wilcoxon signed-rank test - overview

This page offers structured overviews of one or more selected methods. Add additional methods for comparisons (max. of 3) by clicking on the dropdown button in the right-hand column. To practice with a specific method click the button at the bottom row of the table

One sample Wilcoxon signed-rank test | Cochran's Q test | One sample $z$ test for the mean |
You cannot compare more than 3 methods |
---|---|---|---|

Independent variable | Independent/grouping variable | Independent variable | |

None | One within subject factor ($\geq 2$ related groups) | None | |

Dependent variable | Dependent variable | Dependent variable | |

One of ordinal level | One categorical with 2 independent groups | One quantitative of interval or ratio level | |

Null hypothesis | Null hypothesis | Null hypothesis | |

H_{0}: $m = m_0$
Here $m$ is the population median, and $m_0$ is the population median according to the null hypothesis. | H_{0}: $\pi_1 = \pi_2 = \ldots = \pi_I$
Here $\pi_1$ is the population proportion of 'successes' for group 1, $\pi_2$ is the population proportion of 'successes' for group 2, and $\pi_I$ is the population proportion of 'successes' for group $I.$ | H_{0}: $\mu = \mu_0$
Here $\mu$ is the population mean, and $\mu_0$ is the population mean according to the null hypothesis. | |

Alternative hypothesis | Alternative hypothesis | Alternative hypothesis | |

H_{1} two sided: $m \neq m_0$H _{1} right sided: $m > m_0$H _{1} left sided: $m < m_0$
| H_{1}: not all population proportions are equal | H_{1} two sided: $\mu \neq \mu_0$H _{1} right sided: $\mu > \mu_0$H _{1} left sided: $\mu < \mu_0$
| |

Assumptions | Assumptions | Assumptions | |

- The population distribution of the scores is symmetric
- Sample is a simple random sample from the population. That is, observations are independent of one another
| - Sample of 'blocks' (usually the subjects) is a simple random sample from the population. That is, blocks are independent of one another
| - Scores are normally distributed in the population
- Population standard deviation $\sigma$ is known
- Sample is a simple random sample from the population. That is, observations are independent of one another
| |

Test statistic | Test statistic | Test statistic | |

Two different types of test statistics can be used, but both will result in the same test outcome. We will denote the first option the $W_1$ statistic (also known as the $T$ statistic), and the second option the $W_2$ statistic.
In order to compute each of the test statistics, follow the steps below:
- For each subject, compute the sign of the difference score $\mbox{sign}_d = \mbox{sgn}(\mbox{score} - m_0)$. The sign is 1 if the difference is larger than zero, -1 if the diffence is smaller than zero, and 0 if the difference is equal to zero.
- For each subject, compute the absolute value of the difference score $|\mbox{score} - m_0|$.
- Exclude subjects with a difference score of zero. This leaves us with a remaining number of difference scores equal to $N_r$.
- Assign ranks $R_d$ to the $N_r$ remaining
*absolute*difference scores. The smallest absolute difference score corresponds to a rank score of 1, and the largest absolute difference score corresponds to a rank score of $N_r$. If there are ties, assign them the average of the ranks they occupy.
- $W_1 = \sum\, R_d^{+}$
or $W_1 = \sum\, R_d^{-}$ That is, sum all ranks corresponding to a positive difference or sum all ranks corresponding to a negative difference. Theoratically, both definitions will result in the same test outcome. However:- Tables with critical values for $W_1$ are usually based on the smaller of $\sum\, R_d^{+}$ and $\sum\, R_d^{-}$. So if you are using such a table, pick the smaller one.
- If you are using the normal approximation to find the $p$ value, it makes things most straightforward if you use $W_1 = \sum\, R_d^{+}$ (if you use $W_1 = \sum\, R_d^{-}$, the right and left sided alternative hypotheses 'flip').
- $W_2 = \sum\, \mbox{sign}_d \times R_d$
That is, for each remaining difference score, multiply the rank of the absolute difference score by the sign of the difference score, and then sum all of the products.
| If a failure is scored as 0 and a success is scored as 1:
$Q = k(k - 1) \dfrac{\sum_{groups} \Big (\mbox{group total} - \frac{\mbox{grand total}}{k} \Big)^2}{\sum_{blocks} \mbox{block total} \times (k - \mbox{block total})}$ Here $k$ is the number of related groups (usually the number of repeated measurements), a group total is the sum of the scores in a group, a block total is the sum of the scores in a block (usually a subject), and the grand total is the sum of all the scores. Before computing $Q$, first exclude blocks with equal scores in all $k$ groups. | $z = \dfrac{\bar{y} - \mu_0}{\sigma / \sqrt{N}}$
Here $\bar{y}$ is the sample mean, $\mu_0$ is the population mean according to the null hypothesis, $\sigma$ is the population standard deviation, and $N$ is the sample size. The denominator $\sigma / \sqrt{N}$ is the standard deviation of the sampling distribution of $\bar{y}$. The $z$ value indicates how many of these standard deviations $\bar{y}$ is removed from $\mu_0$. | |

Sampling distribution of $W_1$ and of $W_2$ if H_{0} were true | Sampling distribution of $Q$ if H_{0} were true | Sampling distribution of $z$ if H_{0} were true | |

Sampling distribution of $W_1$:
If $N_r$ is large, $W_1$ is approximately normally distributed with mean $\mu_{W_1}$ and standard deviation $\sigma_{W_1}$ if the null hypothesis were true. Here $$\mu_{W_1} = \frac{N_r(N_r + 1)}{4}$$ $$\sigma_{W_1} = \sqrt{\frac{N_r(N_r + 1)(2N_r + 1)}{24}}$$ Hence, if $N_r$ is large, the standardized test statistic $$z = \frac{W_1 - \mu_{W_1}}{\sigma_{W_1}}$$ follows approximately the standard normal distribution if the null hypothesis were true. Sampling distribution of $W_2$: If $N_r$ is large, $W_2$ is approximately normally distributed with mean $0$ and standard deviation $\sigma_{W_2}$ if the null hypothesis were true. Here $$\sigma_{W_2} = \sqrt{\frac{N_r(N_r + 1)(2N_r + 1)}{6}}$$ Hence, if $N_r$ is large, the standardized test statistic $$z = \frac{W_2}{\sigma_{W_2}}$$ follows approximately the standard normal distribution if the null hypothesis were true. If $N_r$ is small, the exact distribution of $W_1$ or $W_2$ should be used. Note: if ties are present in the data, the formula for the standard deviations $\sigma_{W_1}$ and $\sigma_{W_2}$ is more complicated. | If the number of blocks (usually the number of subjects) is large, approximately the chi-squared distribution with $k - 1$ degrees of freedom | Standard normal distribution | |

Significant? | Significant? | Significant? | |

For large samples, the table for standard normal probabilities can be used: Two sided: - Check if $z$ observed in sample is at least as extreme as critical value $z^*$ or
- Find two sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
- Check if $z$ observed in sample is equal to or larger than critical value $z^*$ or
- Find right sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
- Check if $z$ observed in sample is equal to or smaller than critical value $z^*$ or
- Find left sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
| If the number of blocks is large, the table with critical $X^2$ values can be used. If we denote $X^2 = Q$:
- Check if $X^2$ observed in sample is equal to or larger than critical value $X^{2*}$ or
- Find $p$ value corresponding to observed $X^2$ and check if it is equal to or smaller than $\alpha$
| Two sided:
- Check if $z$ observed in sample is at least as extreme as critical value $z^*$ or
- Find two sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
- Check if $z$ observed in sample is equal to or larger than critical value $z^*$ or
- Find right sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
- Check if $z$ observed in sample is equal to or smaller than critical value $z^*$ or
- Find left sided $p$ value corresponding to observed $z$ and check if it is equal to or smaller than $\alpha$
| |

n.a. | n.a. | $C\%$ confidence interval for $\mu$ | |

- | - | $\bar{y} \pm z^* \times \dfrac{\sigma}{\sqrt{N}}$
where the critical value $z^*$ is the value under the normal curve with the area $C / 100$ between $-z^*$ and $z^*$ (e.g. $z^*$ = 1.96 for a 95% confidence interval). The confidence interval for $\mu$ can also be used as significance test. | |

n.a. | n.a. | Effect size | |

- | - | Cohen's $d$:Standardized difference between the sample mean and $\mu_0$: $$d = \frac{\bar{y} - \mu_0}{\sigma}$$ Cohen's $d$ indicates how many standard deviations $\sigma$ the sample mean $\bar{y}$ is removed from $\mu_0.$ | |

n.a. | n.a. | Visual representation | |

- | - | ||

n.a. | Equivalent to | n.a. | |

- | Friedman test, with a categorical dependent variable consisting of two independent groups. | - | |

Example context | Example context | Example context | |

Is the median mental health score of office workers different from $m_0 = 50$? | Subjects perform three different tasks, which they can either perform correctly or incorrectly. Is there a difference in task performance between the three different tasks? | Is the average mental health score of office workers different from $\mu_0 = 50$? Assume that the standard deviation of the mental health scores in the population is $\sigma = 3.$ | |

SPSS | SPSS | n.a. | |

Specify the measurement level of your variable on the Variable View tab, in the column named Measure. Then go to:
Analyze > Nonparametric Tests > One Sample... - On the Objective tab, choose Customize Analysis
- On the Fields tab, specify the variable for which you want to compute the Wilcoxon signed-rank test
- On the Settings tab, choose Customize tests and check the box for 'Compare median to hypothesized (Wilcoxon signed-rank test)'. Fill in your $m_0$ in the box next to Hypothesized median
- Click Run
- Double click on the output table to see the full results
| Analyze > Nonparametric Tests > Legacy Dialogs > K Related Samples...
- Put the $k$ variables containing the scores for the $k$ related groups in the white box below Test Variables
- Under Test Type, select Cochran's Q test
| - | |

Jamovi | Jamovi | n.a. | |

T-Tests > One Sample T-Test
- Put your variable in the box below Dependent Variables
- Under Tests, select Wilcoxon rank
- Under Hypothesis, fill in the value for $m_0$ in the box next to Test Value, and select your alternative hypothesis
| Jamovi does not have a specific option for the Cochran's Q test. However, you can do the Friedman test instead. The $p$ value resulting from this Friedman test is equivalent to the $p$ value that would have resulted from the Cochran's Q test. Go to:
ANOVA > Repeated Measures ANOVA - Friedman - Put the $k$ variables containing the scores for the $k$ related groups in the box below Measures
| - | |

Practice questions | Practice questions | Practice questions | |